The daily care of solenoid valves mainly includes the following aspects:
Regular cleaning: The solenoid valve will be affected by dust, impurities and other pollutants during use, so it needs to be cleaned regularly. When cleaning, the power supply should be disconnected first, and the outside of the solenoid valve should be wiped with a detergent and a soft cloth to ensure that its surface is clean. For internal parts, it is recommended to soak them with a special cleaning solvent, then rinse them with clean water and ensure that they are thoroughly dried.
Lubrication and maintenance: The moving parts inside the solenoid valve need to be lubricated and maintained regularly to reduce friction and wear and extend the service life. Choose appropriate lubricating oil and operate according to the requirements in the manual.
Check the connecting bolts: The tightness of the connecting bolts has a great influence on the performance of the solenoid valve. Too tight may cause deformation, and too loose may cause problems such as air leakage. Therefore, pay special attention to adjusting the strength of the bolts to moderate during maintenance.
Replace worn parts: During long-term use, some parts of the solenoid valve may fail due to wear. For example, key components such as the solenoid winding and the valve core should be replaced in time when they are severely worn.
Performance inspection and testing: Regularly inspecting the performance of the solenoid valve is an important measure to prevent failures. The working status of the solenoid valve can be judged by checking the current of the electromagnet and the opening and closing time and accuracy of the valve. In addition, performance tests such as pressure test and flow test can further verify its performance.
Keep the environment clean and dry: The working environment of the solenoid valve has a great impact on its performance.
